1 roller – BPM-1R

Chassis Dynanometer to make dyno test on Motorbikes - Bapro is the only company totally dedicated to the development and production of chassis dynamo-meters/road simulators for cars and motorbikes.

Tags: dynamometer, motorcycle dynamometer, chassis dynamometer, dynamometer testing

Request information

Ho letto ed accetto l'informativa sulla privacy

Request information

1 roller – BPM-1R
1 roller – BPM-1R
1 roller – BPM-1R
1 roller – BPM-1R
1 roller – BPM-1R

Advantages:

  • Shorter repair time (fast and exact diagnosis)
  • effective use of the instruments already present in workshop (diagnosis equipment, gas analyzer)
  • Avoid any risks from road tests (traffic, accidents, fines)
  • Results certification (performance enhancement)
  • Accessories sale improvement by result verification (exhaust systems, efi controller etc..)
  • Second-hand vehicles sale improvement by engine health certification
  • Vehicle check before second-hand trades
  • Renting for tests and technical checks

Measuring program:

  • Trasmission verification (clutch slippage)
  • Power step test
  • Power sweep test
  • Cooling system check (radiator, fan sensor, thermostatic valve)
  • Diagnosis by gas analyzer under load
  • Vehicle test with constant speed
  • Vehicle test with constant force
  • Vehicle test with constant load
  • Road simulation (slope, drag resistance, weight)
  • Vehicle test with constant RPM
  • Durability tests
  • Engine mapping to all RPM
  • Diagnosis by scantool during road simulation

Standard configuration:

  • Powder coated tubolar frame made by high strength steel
  • Big diameter roller knurled over the entire width
  • Eddy current brake with load cell
  • Brake protection grid
  • Chassis dynamometer management software
  • Infrared remote control
  • Built-in weather station
  • Lambda sensor input
  • Built-in rev-counter system
  • Training course to our factory

Optional:

  • Personal computer with 19” monitor and printer
  • Safety barriers
  • Anchoring ratchet straps
  • Ear muff with high attenuation
  • Proportional ventilation speed control
  • air fan conveyor
  • vehicle starting system
  • Wide band lambda system
  • Inductive clamp
  • Ventilation system with PC support
  • Ventilation system with PC support and built-in fan pipe for external connection
  • fan pipe for external connection
  • Fan
  • Fan movable on wheels
  • Ventilation system remote control
  • heavy duty steel frame with front wheel mechanical lock
  • tiltable ramp with air springs
  • built-in exhaust fan
  • front wheel mechanical lock with anchoring plate

Mechanical features:

  • rollers diameter 400 mm
  • rollers width 310 mm
  • roller balancing grade Q 6.3
  • equivalent base inertia 80 kg
  • dimensions 3360×1860 mm
  • deck height 410 mm
  • weight 550 kg

Performance:

  • Maximum speed 330 km/h
  • Maximum adsorbable power 450 HP
  • Maximum measurable power 500 HP
  • Maximum traction force 5000 N

Power supply:

  • voltage 3/N/PE 380 VAC
  • frequency 50 Hz
  • fuses 16 A

Powder coated tubular frame made by high strength steel

Allow to test high power heavy vehicles ensuring steady measures over the time.

Pro: Maximum strength with minimum flexure compared to the competitor sheet metal frame.

1 big diameter rollers knurled over the entire width

Bapro is the sole to adopt the cut knurling that give the best grip to the tire The twin rollers version double the tire contact patch compared the single roller version

Pro: maximum precision, minimum slippage, avoid the tire overheat with less wear

Eddy current brake with load cell

Allow to perform load tests and fixed rpm

Pro: the brake and the rollers are mounted in the same frame, that is conceived to withstand the power of the ultra high-power vehicles.

Load Cell

Standard feature, allow the measure the power in steady state tests

Pro: Accurately mounted between rose joint

Brake Protection Grid

Strong grid, walkable, big holes for the cooling

Pro: sturdy and optimal cooling for the brake

Chassis dynamometer management software

Allow to perform, save, compare and print the tests

Pro: Updated, complete, particularly intuitive, with analogue and digital gauges. It works without mouse and by remote control. Compatible with the present and future Windows operating systems. It doesn’t need a dedicated computer and it works on the notebooks too!

Infrared remote control

Operating system free

Pro: allow to perform any tests without stopping the vehicle.

Built-in weather station

Pressure–temperature – allow to measure the weather conditions

Pro: the sole dyno that corrects the power reading in real-time according the different standards

Lambda sensor input

Allow to connect the vehicle lambda probe or an external controller

Pro: Allow to compare the dynamometer readings with the vehicle carburetion. Invaluable during the tuning or the mapping.

Built-in rev-counter system

Acquire the engine rpm directly from the spark plug or from an external revolution counter

Pro: Easy to use

Training course to our factory

Directly at the factory you can learn every aspect of the road simulator

Pro: You can exploit years of experience.

Personal Computer With 19″ Monitor And Printer

last generation operating system, big monitor

Pro: ready to use and checked with the dynamometer.

2 Safety barriers

High diameter iron section with panel and Bapro’s logo

Pro: safety protection.

Anchoring Ratchet Straps

Hold firmly the test vehicle to the chassis dynamometer

Pro: sling bands that permit to adapt to every vehicle

High attenuation Ear Muff

Safeguard the operator from loud vehicles

Pro: High quality.

Infrared Tire Temperature Sensor

Allow to measure the tire temperature

Pro: assure the maximum safety during the tests.

Air Conveyor

Allow to direct the air flux directly on the radiators

Pro: Optimize the cooling of the vehicle

Vehicle starting system

Allow the start up the vehicles not provided of starting motor

Pro: simplify the tests for all vehicles

Ventilation system integrated with computer support

Tubular frame, long lasting structure and vibration-proofing

Pro: allow to place the computer in best position, in front of the operator. In this way it’s possible to keep under control the data from the dynamometer and the vehicle at the same time.

Wide band lambda system

5 wires wide band lambda probe

Pro: Optimum data accuracy over the entire working range of the engine.

Ventilation system integrated with computer support and built-in fan pipe for external connection

Tubular frame, long lasting structure and vibration-proofing)

Pro: allow to place the computer in best position, in front of the operator. In this way it’s possible to keep under control the data from the dynamometer and the vehicle at the same time.

Air Conveyor

Allow to direct the air flux directly on the radiators

Pro: Optimize the cooling of the vehicle. Built-in fan pipe pro: simplify the installation when the road simulator is installed in a closed room

Fan: Target power 2,2 kW with flow rate 19000 m3/h

Allow to cool every vehicle

Pro: perfect to have the best flow on the radiators

Fan movable on wheels

Target power 2,2 kW, flow rate 19000 m3/h allow to cool every vehicle

Pro: perfect when the dynamometer is installed on floor, can be used a supplementary fan to cool down accessory, exhaust system, radiator….

Ventilation System Remote Control

Developed with the ventilation system

Pro: allow to control the fans without leaving the vehicle

Frame with front wheel mechanical lock

Tubular frame, long lasting structure and vibration-proofing

Pro: complete the road simulator to upgrade from the pit version to the above ground version. The mechanical wheel lock is built by high strength steel and allow to easily adapt the road simulator wheelbase to the vehicle

Tiltable ramp made by grating with gas springs

Built with high strength steel, light and strong

Pro: Designed with double use: safety and loading the vehicle. Assure the technician in case of mechanical failure or projection of stones, wide surface to simplify the loading of the vehicle.

Exhaust Extraction System

Available only together the support with built-in fan pipe for external connection.

Pro: functionality and integration

Mechanical wheel lock with anchoring plate

High thickness plate, complete the pit installation by giving the working surface for the mechanical wheel lock

Pro: Complete and allow the right use of pit version of road simulator

BPM-1R BPM-2R BPA-2R BPA-4R BPT-2R
  Performance
  Maximum speed 330 km/h 350 km/h 360 km/h 360 km/h 220 km/h
  Maximum adsorbable power 450 HP 500 HP 550 HP 1100 HP 800 CV
  Maximum measurable power 500 HP 550 HP 600 HP 1200 HP 900 CV
  Maximum traction force 5000 N 5000 N 8000 N 16000 N 900 CV
  Mechanical features
  Rollers diameter 400 mm 400 mm 400 mm 400 mm 400 mm
  Rollers width 310 mm 310 mm 700 mm 700 mm 800 mm
  Roller balancing grade Q 6.3 Q 6.3 Q 6.3 Q 6.3 Q 6.3
  Equivalent base inertia 80 Kg 80 Kg 450 Kg 900 Kg 550 Kg
  Dimensions 3360×1860 mm 3360×1860 mm 3470×1135 mm 3470×5300 mm 4650×1150
  Deck height 410 mm 410 mm 410 mm 460 mm 640 mm
  Weight 550 kg 600 kg 1500 kg 3400 kg